Easy-Lift Kit, SuperPro Lift 45 mm, Toyota Hilux 2016 - 2020

Toyota Hilux SuperPro Easy Lift Kit - TRC219LK

We acknowledge that spacer lifts have an ugly past. Typically they have not been properly engineered or tested by the manufacturers/importer. We have also seen manufacturers make these kits to lift vehicles beyond a safe or legal lift. SuperPro has done the engineering work to get these kits right! They have incorporated each vehicle's suspension geometry into the design of every kit including consideration of the solid height to ensure the shock absorber does not bottom out before it strikes the bump stop. The lift height of each kit is unique and the associated hardware is designed and engineered to be safe and legal. No other spacer lifts on the market achieve what SuperPro has.

Who are the Ezy Lift kits designed for?

These kits are ideally suited to a 4x4 owner who:

• Wants to fit bigger wheels and tyres, but is not looking for an expensive hardcore off-road suspension set-up.
• Wants more ground clearance but is reticent to change everything so early in the vehicle's life.

A SuperPro Ezy-Lift kit is designed, not to replace a traditional suspension lift kit, but to give vehicle owners another option for increasing ground clearance.

The Legislation says... Yes, Ezy-Lift spacer lift kits are legal

The following only applies if our Ezy-Lift kits are fitted correctly to vehicles with standard suspension (following all instructions included in the kit).

The original design philosophy behind the Ezy-Lift kits

It was never the intention to offer these in competition to a full suspension lift kit, nor was it thought to be used by an extreme off roader.

The SuperPro Ezy-Lift Kit is an alternative best suited to the softcore 4WD owner, who wants a less intrusive, easily reversible, inexpensive, safe & legal option to achieve a little more ground clearance and to retain the “feel” of the O.E suspension with the look of a lifted pickup.

Lift Height - 45mm

This kit will lift the vehicle approx. 45mm and retains the standard suspension.

Kit Contains:

• 2 Front Strut Spacers
• 2 Rear Raising Blocks
• 4 U Bolts

Manufacturer Part Number: TRC219LK

IMPORTANT SAFETY NOTE – THE MANUFACTURERS ADVICE IS THAT ALL NUTS MUST BE RE-TORQUED AFTER THE FIRST 500 MILES AND AGAIN AFTER THE FIRST 1,000 MILES.